Home / Products / RETOFLEX / High Temperature Cooking Film Series
High Temperature Cooking Film Series

High Temperature Cooking Film Series

DisclaimerThe following information is based on the knowledge and experience, which we have actually mastered. We strongly recommend that users thoroughly and carefully test products before using them to verify whether they are suitable for users' own process conditions and uses, and suggest that you consult with our technicians. The above technical information is not regarded as any guarantee of us, and therefore we do not bear any responsibility.

PREV:No previous product
NEXT:No next product



Product Description


This product is a composite high temperature cooking film and bag, which is made of high temperature film material.





No plasticizer, low solvent residue, no odor, safe and hygienic.

Suitable for vacuum pumping, soft material, high strength and good heat sealing.

The material is made of high temperature resistant cooking material and can be cooked at high temperature.

High puncture resistance.

The oxygen barrier is strong and the fragrance is good.

It is suitable for hot forming automatic packaging equipment. After vacuum packaging, the surface of the packaging bags is fitted and smoothed.





It is suitable for cooking and sterilizing at 100 to 135 degrees.

The peel strength is more than 2.5N/15mm, and the heat sealing strength is more than 50N/15mm.

Other functional indicators can be agreed by the supplier and the buyer.。

Typical structures are NY/NY/RCPP, PET/AL/NY/RCPP, NY/RCPP and NY/AL/RCPP.


Usage Method

Filling and heat sealing under normal pressure or vacuum, cooking and sterilizing at high temperature in large sterilizing pot or autoclave.


Mainly used for dumplings, meat cooked food, sauce and other food packaging.


Matters Needing Attention

When loading the car, be careful to light and prevent the mechanical collision. When stopping in the middle of the road, it is not allowed to stop in the sun and prevent insolation. It should be stopped in the cool place and the unloading should be in the cool place, so as to avoid the shrinkage and deformation of the products.

This product should be placed at storage conditions, which temperature is not more than 35 degrees. In a clean, dry, ventilated and cool storehouse, it should be stacked properly. The distance from the heat source is greater than 2m.

When used, it should be used now and should not be placed in a high temperature workshop for a long time.


Product description